Work out your fence
The block size is Median of 18 house lots in Macquarie Park. The metres are an estimate; change them to match your property.
Macquarie Park 2113 · Ryde · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $9,110–$11,870.
Your 50/50 share · treated pine paling
$9,110–$11,870
110.4 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 18 house lots in Macquarie Park. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $9,110–$11,870 | $18,220–$23,740 | $3,150–$4,110 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $7,120–$9,110 | $14,240–$18,220 | $2,460–$3,150 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,660–$8,280 | $3,310–$16,560 | $570–$2,870 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,210–$4,970 | $4,420–$9,940 | $760–$1,720 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,200–$19,320 | $6,400–$38,640 | $1,110–$6,690 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,420–$22,080 | $8,830–$44,160 | $1,530–$7,640 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,940–$19,320 | $19,870–$38,640 | $3,440–$6,690 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,160–$17,440 | $20,310–$34,890 | $3,510–$6,040 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,040–$15,180 | $22,080–$30,360 | $3,820–$5,250 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,800–$24,840 | $27,600–$49,680 | $4,780–$8,600 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,180–$38,640+ | $30,360–$77,280+ | $5,250–$13,370+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $24,840–$55,200 | $49,680–$110,400 | $8,600–$19,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $27,600–$66,240+ | $55,200–$132,480+ | $9,550–$22,920+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $44,160–$66,240 | $88,320–$132,480 | $15,280–$22,920 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Ryde fence rules · Read the full rules
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 110.4 m is $9,110–$11,870.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Macquarie Park is $9,110–$11,870.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| North Shore Fencing & Gates | Treated pine paling | 1.8 m | $110–$150 | fencingsydneynorth.com.au · checked 16 Nov 2026 |
| North Shore Fencing & Gates | Colorbond | 1.8 m | $130–$180 | fencingsydneynorth.com.au · checked 16 Nov 2026 |
Price research is available in how we price.