Work out your fence
The block size is Median of 2161 house lots in West Ryde. The metres are an estimate; change them to match your property.
West Ryde 2114 · Ryde · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $8,430–$10,990.
Your 50/50 share · treated pine paling
$8,430–$10,990
102.2 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 2161 house lots in West Ryde. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $8,430–$10,990 | $16,860–$21,970 | $2,510–$3,270 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,590–$8,430 | $13,180–$16,860 | $1,960–$2,510 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,530–$7,670 | $3,070–$15,330 | $460–$2,280 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,040–$4,600 | $4,090–$9,200 | $610–$1,370 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,960–$17,890 | $5,930–$35,770 | $880–$5,320 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,090–$20,440 | $8,180–$40,880 | $1,220–$6,080 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,200–$17,890 | $18,400–$35,770 | $2,740–$5,320 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,400–$16,150 | $18,800–$32,300 | $2,800–$4,800 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,220–$14,050 | $20,440–$28,110 | $3,040–$4,180 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,780–$23,000 | $25,550–$45,990 | $3,800–$6,840 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,050–$35,770+ | $28,110–$71,540+ | $4,180–$10,640+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,000–$51,100 | $45,990–$102,200 | $6,840–$15,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,550–$61,320+ | $51,100–$122,640+ | $7,600–$18,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $40,880–$61,320 | $81,760–$122,640 | $12,160–$18,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Ryde fence rules · Read the full rules
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 102.2 m is $8,430–$10,990.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in West Ryde is $8,430–$10,990.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| North Shore Fencing & Gates | Treated pine paling | 1.8 m | $110–$150 | fencingsydneynorth.com.au · checked 16 Nov 2026 |
| North Shore Fencing & Gates | Colorbond | 1.8 m | $130–$180 | fencingsydneynorth.com.au · checked 16 Nov 2026 |
Price research is available in how we price.