Work out your fence
The block size is Median of 4477 house lots in Ryde. The metres are an estimate; change them to match your property.
Ryde 2112 · Ryde · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $8,110–$10,570.
Your 50/50 share · treated pine paling
$8,110–$10,570
98.3 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 4477 house lots in Ryde. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $8,110–$10,570 | $16,220–$21,130 | $2,510–$3,270 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,340–$8,110 | $12,680–$16,220 | $1,960–$2,510 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,470–$7,370 | $2,950–$14,750 | $460–$2,280 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,970–$4,420 | $3,930–$8,850 | $610–$1,370 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,850–$17,200 | $5,700–$34,410 | $880–$5,320 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,930–$19,660 | $7,860–$39,320 | $1,220–$6,080 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,850–$17,200 | $17,690–$34,410 | $2,740–$5,320 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,040–$15,530 | $18,090–$31,060 | $2,800–$4,800 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,830–$13,520 | $19,660–$27,030 | $3,040–$4,180 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,290–$22,120 | $24,580–$44,240 | $3,800–$6,840 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,520–$34,410+ | $27,030–$68,810+ | $4,180–$10,640+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,120–$49,150 | $44,240–$98,300 | $6,840–$15,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,580–$58,980+ | $49,150–$117,960+ | $7,600–$18,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $39,320–$58,980 | $78,640–$117,960 | $12,160–$18,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Ryde fence rules · Read the full rules
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 98.3 m is $8,110–$10,570.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Ryde is $8,110–$10,570.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| North Shore Fencing & Gates | Treated pine paling | 1.8 m | $110–$150 | fencingsydneynorth.com.au · checked 16 Nov 2026 |
| North Shore Fencing & Gates | Colorbond | 1.8 m | $130–$180 | fencingsydneynorth.com.au · checked 16 Nov 2026 |
Price research is available in how we price.