Work out your fence
The block size is Median of 3000 house lots in North Ryde. The metres are an estimate; change them to match your property.
North Ryde 2113 · Ryde · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $7,340–$9,570.
Your 50/50 share · treated pine paling
$7,340–$9,570
89 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 3000 house lots in North Ryde. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $7,340–$9,570 | $14,690–$19,140 | $2,540–$3,310 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $5,740–$7,340 | $11,480–$14,690 | $1,990–$2,540 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,340–$6,680 | $2,670–$13,350 | $460–$2,310 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,780–$4,010 | $3,560–$8,010 | $620–$1,390 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,580–$15,580 | $5,160–$31,150 | $890–$5,390 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,560–$17,800 | $7,120–$35,600 | $1,230–$6,160 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,010–$15,580 | $16,020–$31,150 | $2,770–$5,390 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,190–$14,060 | $16,380–$28,120 | $2,830–$4,870 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,900–$12,240 | $17,800–$24,480 | $3,080–$4,240 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,130–$20,030 | $22,250–$40,050 | $3,850–$6,930 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,240–$31,150+ | $24,480–$62,300+ | $4,240–$10,780+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $20,030–$44,500 | $40,050–$89,000 | $6,930–$15,400 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $22,250–$53,400+ | $44,500–$106,800+ | $7,700–$18,480+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $35,600–$53,400 | $71,200–$106,800 | $12,320–$18,480 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Ryde fence rules · Read the full rules
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 89 m is $7,340–$9,570.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in North Ryde is $7,340–$9,570.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| North Shore Fencing & Gates | Treated pine paling | 1.8 m | $110–$150 | fencingsydneynorth.com.au · checked 16 Nov 2026 |
| North Shore Fencing & Gates | Colorbond | 1.8 m | $130–$180 | fencingsydneynorth.com.au · checked 16 Nov 2026 |
Price research is available in how we price.