Victoria · local fence rules · checked 17 Nov 2026

Fence rules in Surf Coast.

Most fences here don’t need council approval: front fences up to 1.5 m and side or rear fences up to 2 m. Neighbours split a dividing fence 50/50.

Who pays for a dividing fence?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

Source: Official source · checked 17 Nov 2026

Front fence height limits

Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.

Source: Official source · checked 17 Nov 2026

When you need approval

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Read the council’s wording
Council page: "Fences on street / property boundary diagram – orange area A building permit is required for the following: Masonry fence over 1.2m, and over 1.5m for all other fences such as timber or steel Barbed wire must be at least 150mm back from street alignment (boundary) Corner fences diagram – blue area A" "Swimming pool and spa fences Building permit is always required Minimum height 1.2m Specific construction requirements refer to Building Code of Australia, Volume 2, Australian Standard 1926.1 -2012 Other Notes Gates, screens and roller doors are included in these fence provisions Excavations must b"
Source ↗ · checked 17 Nov 2026
Read the council’s wording
The Surf Coast Planning Scheme applies a Neighbourhood Character Overlay in 11 mapped areas; some schedules control front fence height or style.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Pool fence rules

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Read the council’s wording
Council page: "Find out more In This Section Planning Building Building permits, forms and applications Building report and consent application Property information requests Swimming pool and spa register FAQs - Swimming pool and spa register Your home Building and Plumbing Commission Waste and recycling Rates and" "After you register your pool, we will send you a confirmation of registration which will contain the following information: the date of construction of your pool which building standards will apply to your barrier the due date by which you must have your pool/spa inspected by a private surveyor or p"
Source ↗ · checked 17 Nov 2026

Source: Official source · checked 17 Nov 2026

Fences in bushfire-prone areas

About 97% of Surf Coast is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.

Read the council’s wording
The Surf Coast Planning Scheme applies the Bushfire Management Overlay (BMO) to 38 mapped areas. Buildings and works in the BMO generally need a planning permit; fencing materials may be constrained.
Source ↗ · checked 16 Nov 2026
Read the council’s wording
Parts of Surf Coast are a designated Bushfire Prone Area: about 151,437 ha, roughly 97.3% of the municipality (BPA map LEGL./24-189, gazetted 10/09/2024). Building work in a BPA needs a minimum BAL 12.5 under AS 3959; the BAL is assessed per site.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Heritage and character areas

The Surf Coast planning scheme maps 152 Heritage Overlay areas. A planning permit is often needed to build or change a front fence there. A Neighbourhood Character Overlay can also control front fence height or style.

Read the council’s wording
The Surf Coast Planning Scheme has 152 Heritage Overlay areas mapped. In a Heritage Overlay a planning permit is often required to build or change a front fence; check the property and the overlay schedule.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

What a fence costs in Surf Coast

Torquay has the most published lot data in Surf Coast.

FencePrice per metreYour 50/50 share
Treated pine paling in Torquay$110–$160/m
Colorbond steel in Torquay$120–$180/m

Fence rule FAQs

Do I need council approval for a fence in Surf Coast?

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Who pays for a dividing fence in Surf Coast?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

How high does a pool fence need to be in Surf Coast?

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Can I use a timber fence in a bushfire area?

About 97% of Surf Coast is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.

How much does a fence cost in Torquay?

Treated pine paling is $110–$160/m. Your half of a typical dividing fence is $4,770–$6,880.

Contact Surf Coast

Email [email protected]. Check the council website for current contact details.

Get quotes from Surf Coast fence builders

Compare local quotes with the typical price in Torquay.

  1. Tell us the suburb, fence and length. It takes about 2 minutes.
  2. We send it to up to 3 local fencers. Free for homeowners.
  3. Compare their quotes with the estimate above. You choose who to hire.
Get up to 3 quotes →

Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.