Work out your fence
The block size is the median of 609 house lots in Aireys Inlet. The metres are an estimate; change them to match your property.
Aireys Inlet 3231 · Surf Coast · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $5,540–$7,980.
Your 50/50 share · treated pine paling
$5,540–$7,980
99.8 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is the median of 609 house lots in Aireys Inlet. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $5,540–$7,980 | $11,080–$15,970 | $2,190–$3,150 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $5,940–$9,130 | $11,880–$18,260 | $2,340–$3,610 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,500–$7,490 | $2,990–$14,970 | $590–$2,960 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,000–$4,490 | $3,990–$8,980 | $790–$1,770 |
| Timber picketfrontNational price | $60–$350/m | $2,890–$17,470 | $5,790–$34,930 | $1,140–$6,900 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,990–$10,980 | $7,980–$21,960 | $1,580–$4,330 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,980–$17,470 | $17,960–$34,930 | $3,550–$6,900 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,980–$13,720 | $19,960–$27,450 | $3,940–$5,420 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $12,480–$22,460 | $24,950–$44,910 | $4,930–$8,870 |
| Frameless glasspoolNational price | $280–$700+/m | $13,720–$34,930+ | $27,450–$69,860+ | $5,420–$13,790+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $15,620–$29,540 | $31,240–$59,080 | $6,170–$11,660 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $22,460–$49,900 | $44,910–$99,800 | $8,870–$19,700 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $24,950–$59,880+ | $49,900–$119,760+ | $9,850–$23,640+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $39,920–$59,880 | $79,840–$119,760 | $15,760–$23,640 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Surf Coast fence rules · Read the full rules
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 99.8 m is $5,540–$7,980.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Aireys Inlet is $5,540–$7,980.