Work out your fence
The block size is the median of 123 house lots in Moggs Creek. The metres are an estimate; change them to match your property.
Moggs Creek 3231 · Surf Coast · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $6,190–$8,930.
Your 50/50 share · treated pine paling
$6,190–$8,930
111.6 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is the median of 123 house lots in Moggs Creek. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $6,190–$8,930 | $12,390–$17,860 | $2,430–$3,500 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $6,640–$10,210 | $13,280–$20,420 | $2,610–$4,010 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,670–$8,370 | $3,350–$16,740 | $660–$3,290 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,230–$5,020 | $4,460–$10,040 | $880–$1,970 |
| Timber picketfrontNational price | $60–$350/m | $3,240–$19,530 | $6,470–$39,060 | $1,270–$7,660 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $4,460–$12,280 | $8,930–$24,550 | $1,750–$4,820 |
| Tubular metalfront, poolNational price | $180–$350/m | $10,040–$19,530 | $20,090–$39,060 | $3,940–$7,660 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $11,160–$15,350 | $22,320–$30,690 | $4,380–$6,020 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $13,950–$25,110 | $27,900–$50,220 | $5,480–$9,860 |
| Frameless glasspoolNational price | $280–$700+/m | $15,350–$39,060+ | $30,690–$78,120+ | $6,020–$15,330+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $17,470–$33,030 | $34,930–$66,070 | $6,850–$12,960 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $25,110–$55,800 | $50,220–$111,600 | $9,860–$21,900 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $27,900–$66,960+ | $55,800–$133,920+ | $10,950–$26,280+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $44,640–$66,960 | $89,280–$133,920 | $17,520–$26,280 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Surf Coast fence rules · Read the full rules
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 111.6 m is $6,190–$8,930.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Moggs Creek is $6,190–$8,930.