Work out your fence
The block size is the median of 2 house lots in Winchelsea South. The metres are an estimate; change them to match your property.
Winchelsea South 3241 · Surf Coast · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $2,940–$4,230.
Your 50/50 share · treated pine paling
$2,940–$4,230
52.9 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is the median of 2 house lots in Winchelsea South. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $2,940–$4,230 | $5,870–$8,460 | $1,620–$2,340 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $3,150–$4,840 | $6,300–$9,680 | $1,740–$2,670 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $790–$3,970 | $1,590–$7,940 | $440–$2,190 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,060–$2,380 | $2,120–$4,760 | $580–$1,310 |
| Timber picketfrontNational price | $60–$350/m | $1,530–$9,260 | $3,070–$18,520 | $850–$5,110 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $2,120–$5,820 | $4,230–$11,640 | $1,170–$3,210 |
| Tubular metalfront, poolNational price | $180–$350/m | $4,760–$9,260 | $9,520–$18,520 | $2,630–$5,110 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $5,290–$7,270 | $10,580–$14,550 | $2,920–$4,020 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $6,610–$11,900 | $13,230–$23,810 | $3,650–$6,570 |
| Frameless glasspoolNational price | $280–$700+/m | $7,270–$18,520+ | $14,550–$37,030+ | $4,020–$10,220+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $8,280–$15,660 | $16,560–$31,320 | $4,570–$8,640 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $11,900–$26,450 | $23,810–$52,900 | $6,570–$14,600 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $13,230–$31,740+ | $26,450–$63,480+ | $7,300–$17,520+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $21,160–$31,740 | $42,320–$63,480 | $11,680–$17,520 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Surf Coast fence rules · Read the full rules
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 52.9 m is $2,940–$4,230.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Winchelsea South is $2,940–$4,230.