Work out your fence
The block size is the median of 969 house lots in Yallambie. The metres are an estimate; change them to match your property.
Yallambie 3085 · Banyule · Victoria
A standard fence costs $140–$150/m installed. Your half of a typical dividing fence is about $5,950–$6,290.
Your 50/50 share · treated pine paling
$5,950–$6,290
82.7 m on a typical block · Wider-area fencers’ prices (4 fencers)
The block size is the median of 969 house lots in Yallambie. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (4 fencers) | $140–$150/m | $5,950–$6,290 | $11,910–$12,570 | $2,590–$2,740 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $170–$180/m | $6,950–$7,320 | $13,890–$14,640 | $3,020–$3,190 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,240–$6,200 | $2,480–$12,410 | $540–$2,700 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,650–$3,720 | $3,310–$7,440 | $720–$1,620 |
| Timber picketfrontNational price | $60–$350/m | $2,400–$14,470 | $4,800–$28,950 | $1,040–$6,300 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,310–$9,100 | $6,620–$18,190 | $1,440–$3,960 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,440–$14,470 | $14,890–$28,950 | $3,240–$6,300 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,270–$11,370 | $16,540–$22,740 | $3,600–$4,950 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,340–$18,610 | $20,680–$37,220 | $4,500–$8,100 |
| Frameless glasspoolNational price | $280–$700+/m | $11,370–$28,950+ | $22,740–$57,890+ | $4,950–$12,600+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $14,470–$21,090 | $28,950–$42,180 | $6,300–$9,180 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $18,610–$41,350 | $37,220–$82,700 | $8,100–$18,000 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $20,680–$49,620+ | $41,350–$99,240+ | $9,000–$21,600+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $33,080–$49,620 | $66,160–$99,240 | $14,400–$21,600 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Banyule fence rules · Read the full rules
A treated pine paling fence is $140–$150/m. Your typical 50/50 share for 82.7 m is $5,950–$6,290.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Yallambie is $5,950–$6,290.