Work out your fence
The block size is the median of 2,018 house lots in Heidelberg Heights. The metres are an estimate; change them to match your property.
Heidelberg Heights 3081 · Banyule · Victoria
A standard fence costs $140–$150/m installed. Your half of a typical dividing fence is about $6,300–$6,650.
Your 50/50 share · treated pine paling
$6,300–$6,650
87.5 m on a typical block · Wider-area fencers’ prices (4 fencers)
The block size is the median of 2,018 house lots in Heidelberg Heights. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (4 fencers) | $140–$150/m | $6,300–$6,650 | $12,600–$13,300 | $2,480–$2,610 |
| Colorbond steeldividing, frontWider-area fencers’ prices (3 fencers) | $170–$180/m | $7,350–$7,740 | $14,700–$15,490 | $2,890–$3,040 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,310–$6,560 | $2,630–$13,130 | $520–$2,580 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,750–$3,940 | $3,500–$7,880 | $690–$1,550 |
| Timber picketfrontNational price | $60–$350/m | $2,540–$15,310 | $5,080–$30,630 | $1,000–$6,020 |
| Hardwood paling / lapped and cappeddividing, frontNational price | $80–$220/m | $3,500–$9,630 | $7,000–$19,250 | $1,380–$3,780 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,880–$15,310 | $15,750–$30,630 | $3,100–$6,020 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,750–$12,030 | $17,500–$24,060 | $3,440–$4,730 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,940–$19,690 | $21,880–$39,380 | $4,300–$7,740 |
| Frameless glasspoolNational price | $280–$700+/m | $12,030–$30,630+ | $24,060–$61,250+ | $4,730–$12,040+ |
| Aluminium slat / pool fencingpool, front, screen, dividingVIC median of fencers’ prices | $350–$510/m | $15,310–$22,310 | $30,630–$44,630 | $6,020–$8,770 |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $19,690–$43,750 | $39,380–$87,500 | $7,740–$17,200 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $21,880–$52,500+ | $43,750–$105,000+ | $8,600–$20,640+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $35,000–$52,500 | $70,000–$105,000 | $13,760–$20,640 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Banyule fence rules · Read the full rules
A treated pine paling fence is $140–$150/m. Your typical 50/50 share for 87.5 m is $6,300–$6,650.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Heidelberg Heights is $6,300–$6,650.