Work out your fence
The block size is Median of 1 house lots in Binginwarri. The metres are an estimate; change them to match your property.
Binginwarri 3966 · Wellington · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $4,150–$5,980.
Your 50/50 share · treated pine paling
$4,150–$5,980
74.8 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 1 house lots in Binginwarri. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $4,150–$5,980 | $8,300–$11,970 | $1,230–$1,780 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $4,450–$6,840 | $8,900–$13,690 | $1,320–$2,030 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,120–$5,610 | $2,240–$11,220 | $330–$1,670 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,500–$3,370 | $2,990–$6,730 | $440–$1,000 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,170–$13,090 | $4,340–$26,180 | $640–$3,890 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $2,990–$8,230 | $5,980–$16,460 | $890–$2,440 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $6,730–$13,090 | $13,460–$26,180 | $2,000–$3,890 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $7,480–$10,290 | $14,960–$20,570 | $2,220–$3,050 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $9,350–$16,830 | $18,700–$33,660 | $2,780–$5,000 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $10,290–$26,180+ | $20,570–$52,360+ | $3,050–$7,770+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $11,710–$22,140 | $23,410–$44,280 | $3,470–$6,570 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $16,830–$37,400 | $33,660–$74,800 | $5,000–$11,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $18,700–$44,880+ | $37,400–$89,760+ | $5,550–$13,320+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $29,920–$44,880 | $59,840–$89,760 | $8,880–$13,320 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Wellington fence rules · Read the full rules
We’ve checked some of Wellington’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 74.8 m is $4,150–$5,980.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Binginwarri is $4,150–$5,980.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.