Work out your fence
The block size is Median of 1586 house lots in Maffra. The metres are an estimate; change them to match your property.
Maffra 3860 · Wellington · Victoria
A standard fence costs $110–$160/m installed. Your half of a typical dividing fence is about $5,950–$8,580.
Your 50/50 share · treated pine paling
$5,950–$8,580
107.2 m on a typical block · Wider-area fencers’ prices (7 fencers)
The block size is Median of 1586 house lots in Maffra. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (7 fencers) | $110–$160/m | $5,950–$8,580 | $11,900–$17,150 | $2,450–$3,540 |
| Colorbond steeldividing, frontWider-area fencers’ prices (8 fencers) | $120–$180/m | $6,380–$9,810 | $12,760–$19,620 | $2,630–$4,040 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,610–$8,040 | $3,220–$16,080 | $660–$3,320 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,140–$4,820 | $4,290–$9,650 | $880–$1,990 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,110–$18,760 | $6,220–$37,520 | $1,280–$7,740 |
| Hardwood paling / lapped and cappeddividing, frontNational range (few local prices yet) | $80–$220/m | $4,290–$11,790 | $8,580–$23,580 | $1,770–$4,860 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,650–$18,760 | $19,300–$37,520 | $3,980–$7,740 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,720–$14,740 | $21,440–$29,480 | $4,420–$6,080 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,400–$24,120 | $26,800–$48,240 | $5,530–$9,950 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,740–$37,520+ | $29,480–$75,040+ | $6,080–$15,470+ |
| Aluminium slat / pool fencingpool, front, screen, dividingWider-area fencers’ prices (4 fencers) | $310–$590/m | $16,780–$31,730 | $33,550–$63,460 | $6,920–$13,080 |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $24,120–$53,600 | $48,240–$107,200 | $9,950–$22,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $26,800–$64,320+ | $53,600–$128,640+ | $11,050–$26,520+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $42,880–$64,320 | $85,760–$128,640 | $17,680–$26,520 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Wellington fence rules · Read the full rules
We’ve checked some of Wellington’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.
A treated pine paling fence is $110–$160/m. Your typical 50/50 share for 107.2 m is $5,950–$8,580.
Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.
Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: Vicmap Property, Vicmap Admin and road casements © Department of Transport and Planning, CC BY 4.0. Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Maffra is $5,950–$8,580.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.