Victoria · local fence rules · checked 17 Nov 2026

Fence rules in Wellington.

Most fences here don’t need council approval: front fences up to 1.5 m and side or rear fences up to 2 m. Neighbours split a dividing fence 50/50.

We’ve checked some of Wellington’s pages, not all. Where there’s no council rule on file we show the Victoria rule. Check with council before you build.

Who pays for a dividing fence?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

Source: Official source · checked 17 Nov 2026

Front fence height limits

Up to 1.5 m within 3 m of the street (2 m on a declared main road), unless your planning zone sets a lower limit, sometimes 1.2 m.

Source: Official source · checked 17 Nov 2026

When you need approval

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Read the council’s wording
Council page: "Fences on Common Boundaries Timber fences between adjoining properties may be constructed to a maximum height of 2m without the need for a building permit, however owners are advised to consult their neighbours and the Fences Act 1968 prior to construction." "When constructing a fence that exceeds 2m in height, consideration must be given to windows that face the fence (both yours and your neighbours)." "Further restrictions apply if; the fence is opposite a north facing window and that window is within 3m of the boundary, exceeds a height of 3m and is adjacent to an existing adjoining window or overshadows recreational private open space (Building Regulation 429)."
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Pool fence rules

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Source: Official source · checked 17 Nov 2026

Fences in bushfire-prone areas

About 97% of Wellington is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.

Read the council’s wording
The Wellington Planning Scheme applies the Bushfire Management Overlay (BMO) to 137 mapped areas. Buildings and works in the BMO generally need a planning permit; fencing materials may be constrained.
Source ↗ · checked 16 Nov 2026
Read the council’s wording
Parts of Wellington are a designated Bushfire Prone Area: about 1,068,607 ha, roughly 97.1% of the municipality (BPA map LEGL./25-135, gazetted 10/07/2025). Building work in a BPA needs a minimum BAL 12.5 under AS 3959; the BAL is assessed per site.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

Heritage and character areas

The Wellington planning scheme maps 340 Heritage Overlay areas. A planning permit is often needed to build or change a front fence there.

Read the council’s wording
The Wellington Planning Scheme has 340 Heritage Overlay areas mapped. In a Heritage Overlay a planning permit is often required to build or change a front fence; check the property and the overlay schedule.
Source ↗ · checked 16 Nov 2026

Source: Official source · checked 17 Nov 2026

What a fence costs in Wellington

Sale has the most published lot data in Wellington.

FencePrice per metreYour 50/50 share
Treated pine paling in Sale$110–$160/m
Colorbond steel in Sale$120–$180/m

Fence rule FAQs

Do I need council approval for a fence in Wellington?

Side and rear fences under 2 m, more than 3 m from the front boundary, usually need no building permit. Masonry front fences over 1.2 m often do.

Who pays for a dividing fence in Wellington?

Neighbours usually split a sufficient dividing fence 50/50. If you want something better, you pay the difference.

How high does a pool fence need to be in Wellington?

Any pool or spa that can hold more than 30 cm of water needs a compliant barrier and must be registered with council. Barriers are re-inspected every 4 years.

Can I use a timber fence in a bushfire area?

About 97% of Wellington is a designated Bushfire Prone Area. Building work there needs at least BAL 12.5. The Bushfire Management Overlay also applies in parts, which can trigger a planning permit. Check your address on VicPlan.

How much does a fence cost in Sale?

Treated pine paling is $110–$160/m. Your half of a typical dividing fence is $5,320–$7,670.

Contact Wellington

Email [email protected]. Check the council website for current contact details.

Get quotes from Wellington fence builders

Compare local quotes with the typical price in Sale.

  1. Tell us the suburb, fence and length. It takes about 2 minutes.
  2. We send it to up to 3 local fencers. Free for homeowners.
  3. Compare their quotes with the estimate above. You choose who to hire.
Get up to 3 quotes →

Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.