Work out your fence
The block size is Median of 5 house lots in Wollar. The metres are an estimate; change them to match your property.
Wollar 2850 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,640–$10,320.
Your 50/50 share · treated pine paling
$7,640–$10,320
103.2 m on a typical block · NSW median of fencers’ prices
The block size is Median of 5 house lots in Wollar. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,640–$10,320 | $15,270–$20,640 | $2,530–$3,420 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,450–$8,150 | $12,900–$16,310 | $2,140–$2,700 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,550–$7,740 | $3,100–$15,480 | $510–$2,570 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,060–$4,640 | $4,130–$9,290 | $680–$1,540 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,990–$18,060 | $5,990–$36,120 | $990–$5,990 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,130–$20,640 | $8,260–$41,280 | $1,370–$6,840 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,290–$18,060 | $18,580–$36,120 | $3,080–$5,990 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,490–$16,310 | $18,990–$32,610 | $3,150–$5,400 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,320–$14,190 | $20,640–$28,380 | $3,420–$4,700 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,900–$23,220 | $25,800–$46,440 | $4,280–$7,700 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,190–$36,120+ | $28,380–$72,240+ | $4,700–$11,970+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,220–$51,600 | $46,440–$103,200 | $7,700–$17,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,800–$61,920+ | $51,600–$123,840+ | $8,550–$20,520+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $41,280–$61,920 | $82,560–$123,840 | $13,680–$20,520 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 103.2 m is $7,640–$10,320.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 40% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Wollar is $7,640–$10,320.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.