Work out your fence
The block size is Median of 110 house lots in Rylstone. The metres are an estimate; change them to match your property.
Rylstone 2849 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,500–$10,140.
Your 50/50 share · treated pine paling
$7,500–$10,140
101.4 m on a typical block · NSW median of fencers’ prices
The block size is Median of 110 house lots in Rylstone. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,500–$10,140 | $15,010–$20,280 | $2,960–$4,000 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,340–$8,010 | $12,680–$16,020 | $2,500–$3,160 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,520–$7,610 | $3,040–$15,210 | $600–$3,000 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,030–$4,560 | $4,060–$9,130 | $800–$1,800 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,940–$17,750 | $5,880–$35,490 | $1,160–$7,000 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,060–$20,280 | $8,110–$40,560 | $1,600–$8,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,130–$17,750 | $18,250–$35,490 | $3,600–$7,000 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,330–$16,020 | $18,660–$32,040 | $3,680–$6,320 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,140–$13,940 | $20,280–$27,890 | $4,000–$5,500 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,680–$22,820 | $25,350–$45,630 | $5,000–$9,000 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,940–$35,490+ | $27,890–$70,980+ | $5,500–$14,000+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,820–$50,700 | $45,630–$101,400 | $9,000–$20,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,350–$60,840+ | $50,700–$121,680+ | $10,000–$24,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $40,560–$60,840 | $81,120–$121,680 | $16,000–$24,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 101.4 m is $7,500–$10,140.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Rylstone is $7,500–$10,140.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.