Work out your fence
The block size is Median of 110 house lots in Charbon. The metres are an estimate; change them to match your property.
Charbon 2848 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $9,220–$12,460.
Your 50/50 share · treated pine paling
$9,220–$12,460
124.6 m on a typical block · NSW median of fencers’ prices
The block size is Median of 110 house lots in Charbon. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $9,220–$12,460 | $18,440–$24,920 | $2,280–$3,080 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,790–$9,840 | $15,580–$19,690 | $1,930–$2,430 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,870–$9,350 | $3,740–$18,690 | $460–$2,310 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,490–$5,610 | $4,980–$11,210 | $620–$1,390 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,610–$21,810 | $7,230–$43,610 | $890–$5,390 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,980–$24,920 | $9,970–$49,840 | $1,230–$6,160 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $11,210–$21,810 | $22,430–$43,610 | $2,770–$5,390 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $11,460–$19,690 | $22,930–$39,370 | $2,830–$4,870 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $12,460–$17,130 | $24,920–$34,270 | $3,080–$4,240 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $15,580–$28,040 | $31,150–$56,070 | $3,850–$6,930 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $17,130–$43,610+ | $34,270–$87,220+ | $4,240–$10,780+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $28,040–$62,300 | $56,070–$124,600 | $6,930–$15,400 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $31,150–$74,760+ | $62,300–$149,520+ | $7,700–$18,480+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $49,840–$74,760 | $99,680–$149,520 | $12,320–$18,480 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 124.6 m is $9,220–$12,460.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Charbon is $9,220–$12,460.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.