Work out your fence
The block size is Median of 1 house lots in Warri. The metres are an estimate; change them to match your property.
Warri 2622 · Queanbeyan-Palerang Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,730–$9,100.
Your 50/50 share · treated pine paling
$6,730–$9,100
91 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Warri. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,730–$9,100 | $13,470–$18,200 | $3,050–$4,120 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,690–$7,190 | $11,380–$14,380 | $2,580–$3,250 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,370–$6,830 | $2,730–$13,650 | $620–$3,090 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,820–$4,100 | $3,640–$8,190 | $820–$1,850 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,640–$15,930 | $5,280–$31,850 | $1,190–$7,210 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,640–$18,200 | $7,280–$36,400 | $1,650–$8,240 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,190–$15,930 | $16,380–$31,850 | $3,710–$7,210 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,370–$14,380 | $16,740–$28,760 | $3,790–$6,510 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,100–$12,510 | $18,200–$25,030 | $4,120–$5,670 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,380–$20,480 | $22,750–$40,950 | $5,150–$9,270 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,510–$31,850+ | $25,030–$63,700+ | $5,670–$14,420+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $20,480–$45,500 | $40,950–$91,000 | $9,270–$20,600 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $22,750–$54,600+ | $45,500–$109,200+ | $10,300–$24,720+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $36,400–$54,600 | $72,800–$109,200 | $16,480–$24,720 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Queanbeyan-Palerang Regional fence rules · Read the full rules
We’ve checked some of Queanbeyan-Palerang Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 91 m is $6,730–$9,100.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Warri is $6,730–$9,100.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.