Work out your fence
The block size is Median of 1657 house lots in Jerrabomberra. The metres are an estimate; change them to match your property.
Jerrabomberra 2619 · Queanbeyan-Palerang Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,160–$9,680.
Your 50/50 share · treated pine paling
$7,160–$9,680
96.8 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1657 house lots in Jerrabomberra. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,160–$9,680 | $14,330–$19,360 | $3,030–$4,100 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,050–$7,650 | $12,100–$15,290 | $2,560–$3,240 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,450–$7,260 | $2,900–$14,520 | $620–$3,080 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,940–$4,360 | $3,870–$8,710 | $820–$1,850 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,810–$16,940 | $5,610–$33,880 | $1,190–$7,180 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,870–$19,360 | $7,740–$38,720 | $1,640–$8,200 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,710–$16,940 | $17,420–$33,880 | $3,690–$7,180 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,910–$15,290 | $17,810–$30,590 | $3,770–$6,480 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,680–$13,310 | $19,360–$26,620 | $4,100–$5,640 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,100–$21,780 | $24,200–$43,560 | $5,130–$9,230 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,310–$33,880+ | $26,620–$67,760+ | $5,640–$14,350+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,780–$48,400 | $43,560–$96,800 | $9,230–$20,500 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $24,200–$58,080+ | $48,400–$116,160+ | $10,250–$24,600+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,720–$58,080 | $77,440–$116,160 | $16,400–$24,600 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Queanbeyan-Palerang Regional fence rules · Read the full rules
We’ve checked some of Queanbeyan-Palerang Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 96.8 m is $7,160–$9,680.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Jerrabomberra is $7,160–$9,680.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.