Work out your fence
The block size is the median of 886 house lots in Crestwood. The metres are an estimate; change them to match your property.
Crestwood 2620 · Queanbeyan-Palerang Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,430–$10,040.
Your 50/50 share · treated pine paling
$7,430–$10,040
100.4 m on a typical block · NSW median of fencers’ prices
The block size is the median of 886 house lots in Crestwood. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,430–$10,040 | $14,860–$20,080 | $2,530–$3,420 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,280–$7,930 | $12,550–$15,860 | $2,140–$2,700 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,510–$7,530 | $3,010–$15,060 | $510–$2,570 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,010–$4,520 | $4,020–$9,040 | $680–$1,540 |
| Timber picketfrontNational price | $60–$350/m | $2,910–$17,570 | $5,820–$35,140 | $990–$5,990 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $4,020–$20,080 | $8,030–$40,160 | $1,370–$6,840 |
| Tubular metalfront, poolNational price | $180–$350/m | $9,040–$17,570 | $18,070–$35,140 | $3,080–$5,990 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,240–$15,860 | $18,470–$31,730 | $3,150–$5,400 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $10,040–$13,810 | $20,080–$27,610 | $3,420–$4,700 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $12,550–$22,590 | $25,100–$45,180 | $4,280–$7,700 |
| Frameless glasspoolNational price | $280–$700+/m | $13,810–$35,140+ | $27,610–$70,280+ | $4,700–$11,970+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $22,590–$50,200 | $45,180–$100,400 | $7,700–$17,100 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $25,100–$60,240+ | $50,200–$120,480+ | $8,550–$20,520+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $40,160–$60,240 | $80,320–$120,480 | $13,680–$20,520 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Queanbeyan-Palerang Regional fence rules · Read the full rules
We’ve checked some of Queanbeyan-Palerang Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 100.4 m is $7,430–$10,040.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Crestwood is $7,430–$10,040.