Work out your fence
The block size is Median of 1 house lots in Wamboin. The metres are an estimate; change them to match your property.
Wamboin 2620 · Queanbeyan-Palerang Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $3,330–$4,500.
Your 50/50 share · treated pine paling
$3,330–$4,500
45 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Wamboin. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $3,330–$4,500 | $6,660–$9,000 | $2,220–$3,000 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $2,810–$3,560 | $5,630–$7,110 | $1,880–$2,370 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $680–$3,380 | $1,350–$6,750 | $450–$2,250 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $900–$2,030 | $1,800–$4,050 | $600–$1,350 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,310–$7,880 | $2,610–$15,750 | $870–$5,250 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $1,800–$9,000 | $3,600–$18,000 | $1,200–$6,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $4,050–$7,880 | $8,100–$15,750 | $2,700–$5,250 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $4,140–$7,110 | $8,280–$14,220 | $2,760–$4,740 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $4,500–$6,190 | $9,000–$12,380 | $3,000–$4,130 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $5,630–$10,130 | $11,250–$20,250 | $3,750–$6,750 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $6,190–$15,750+ | $12,380–$31,500+ | $4,130–$10,500+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $10,130–$22,500 | $20,250–$45,000 | $6,750–$15,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $11,250–$27,000+ | $22,500–$54,000+ | $7,500–$18,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $18,000–$27,000 | $36,000–$54,000 | $12,000–$18,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Queanbeyan-Palerang Regional fence rules · Read the full rules
We’ve checked some of Queanbeyan-Palerang Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 45 m is $3,330–$4,500.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Wamboin is $3,330–$4,500.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.