Work out your fence
The block size is the median of 1,405 house lots in Villawood. The metres are an estimate; change them to match your property.
Villawood 2163 · Canterbury-Bankstown · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $8,090–$10,550.
Your 50/50 share · treated pine paling
$8,090–$10,550
98.1 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is the median of 1,405 house lots in Villawood. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $8,090–$10,550 | $16,190–$21,090 | $2,520–$3,290 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,330–$8,090 | $12,650–$16,190 | $1,970–$2,520 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,470–$7,360 | $2,940–$14,720 | $460–$2,300 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,960–$4,410 | $3,920–$8,830 | $610–$1,380 |
| Timber picketfrontNational price | $60–$350/m | $2,840–$17,170 | $5,690–$34,340 | $890–$5,360 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,920–$19,620 | $7,850–$39,240 | $1,220–$6,120 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,830–$17,170 | $17,660–$34,340 | $2,750–$5,360 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,030–$15,500 | $18,050–$31,000 | $2,820–$4,830 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,810–$13,490 | $19,620–$26,980 | $3,060–$4,210 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $12,260–$22,070 | $24,530–$44,150 | $3,830–$6,890 |
| Frameless glasspoolNational price | $280–$700+/m | $13,490–$34,340+ | $26,980–$68,670+ | $4,210–$10,710+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $22,070–$49,050 | $44,150–$98,100 | $6,890–$15,300 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $24,530–$58,860+ | $49,050–$117,720+ | $7,650–$18,360+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $39,240–$58,860 | $78,480–$117,720 | $12,240–$18,360 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Canterbury-Bankstown fence rules · Read the full rules
We’ve checked some of Canterbury-Bankstown’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 98.1 m is $8,090–$10,550.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Villawood is $8,090–$10,550.