Work out your fence
The block size is the median of 4,485 house lots in Earlwood. The metres are an estimate; change them to match your property.
Earlwood 2206 · Canterbury-Bankstown · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $8,020–$10,450.
Your 50/50 share · treated pine paling
$8,020–$10,450
97.2 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is the median of 4,485 house lots in Earlwood. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $8,020–$10,450 | $16,040–$20,900 | $2,110–$2,750 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,270–$8,020 | $12,540–$16,040 | $1,650–$2,110 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,460–$7,290 | $2,920–$14,580 | $380–$1,920 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,940–$4,370 | $3,890–$8,750 | $510–$1,150 |
| Timber picketfrontNational price | $60–$350/m | $2,820–$17,010 | $5,640–$34,020 | $740–$4,480 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,890–$19,440 | $7,780–$38,880 | $1,020–$5,120 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,750–$17,010 | $17,500–$34,020 | $2,300–$4,480 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,940–$15,360 | $17,880–$30,720 | $2,360–$4,040 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,720–$13,370 | $19,440–$26,730 | $2,560–$3,520 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $12,150–$21,870 | $24,300–$43,740 | $3,200–$5,760 |
| Frameless glasspoolNational price | $280–$700+/m | $13,370–$34,020+ | $26,730–$68,040+ | $3,520–$8,960+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,870–$48,600 | $43,740–$97,200 | $5,760–$12,800 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $24,300–$58,320+ | $48,600–$116,640+ | $6,400–$15,360+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $38,880–$58,320 | $77,760–$116,640 | $10,240–$15,360 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Canterbury-Bankstown fence rules · Read the full rules
We’ve checked some of Canterbury-Bankstown’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 97.2 m is $8,020–$10,450.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Earlwood is $8,020–$10,450.