Work out your fence
The block size is the median of 3,830 house lots in Bankstown. The metres are an estimate; change them to match your property.
Bankstown 2200 · Canterbury-Bankstown · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $8,350–$10,880.
Your 50/50 share · treated pine paling
$8,350–$10,880
101.2 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is the median of 3,830 house lots in Bankstown. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $8,350–$10,880 | $16,700–$21,760 | $2,260–$2,950 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,530–$8,350 | $13,050–$16,700 | $1,770–$2,260 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,520–$7,590 | $3,040–$15,180 | $410–$2,060 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $2,020–$4,550 | $4,050–$9,110 | $550–$1,230 |
| Timber picketfrontNational price | $60–$350/m | $2,930–$17,710 | $5,870–$35,420 | $790–$4,800 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $4,050–$20,240 | $8,100–$40,480 | $1,100–$5,480 |
| Tubular metalfront, poolNational price | $180–$350/m | $9,110–$17,710 | $18,220–$35,420 | $2,470–$4,800 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,310–$15,990 | $18,620–$31,980 | $2,520–$4,330 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $10,120–$13,920 | $20,240–$27,830 | $2,740–$3,770 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $12,650–$22,770 | $25,300–$45,540 | $3,430–$6,170 |
| Frameless glasspoolNational price | $280–$700+/m | $13,920–$35,420+ | $27,830–$70,840+ | $3,770–$9,590+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $22,770–$50,600 | $45,540–$101,200 | $6,170–$13,700 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $25,300–$60,720+ | $50,600–$121,440+ | $6,850–$16,440+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $40,480–$60,720 | $80,960–$121,440 | $10,960–$16,440 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Canterbury-Bankstown fence rules · Read the full rules
We’ve checked some of Canterbury-Bankstown’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 101.2 m is $8,350–$10,880.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bankstown is $8,350–$10,880.