Work out your fence
The block size is Median of 1 house lots in Upper Bylong. The metres are an estimate; change them to match your property.
Upper Bylong 2849 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $4,770–$6,450.
Your 50/50 share · treated pine paling
$4,770–$6,450
64.5 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Upper Bylong. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $4,770–$6,450 | $9,550–$12,900 | $3,460–$4,680 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $4,030–$5,100 | $8,060–$10,190 | $2,930–$3,700 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $970–$4,840 | $1,940–$9,680 | $700–$3,510 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,290–$2,900 | $2,580–$5,810 | $940–$2,110 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,870–$11,290 | $3,740–$22,580 | $1,360–$8,190 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $2,580–$12,900 | $5,160–$25,800 | $1,870–$9,360 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $5,810–$11,290 | $11,610–$22,580 | $4,210–$8,190 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $5,930–$10,190 | $11,870–$20,380 | $4,310–$7,390 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $6,450–$8,870 | $12,900–$17,740 | $4,680–$6,440 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $8,060–$14,510 | $16,130–$29,030 | $5,850–$10,530 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $8,870–$22,580+ | $17,740–$45,150+ | $6,440–$16,380+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $14,510–$32,250 | $29,030–$64,500 | $10,530–$23,400 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $16,130–$38,700+ | $32,250–$77,400+ | $11,700–$28,080+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $25,800–$38,700 | $51,600–$77,400 | $18,720–$28,080 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 64.5 m is $4,770–$6,450.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Upper Bylong is $4,770–$6,450.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.