Work out your fence
The block size is Median of 6 house lots in Two Mile Flat. The metres are an estimate; change them to match your property.
Two Mile Flat 2852 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,910–$9,340.
Your 50/50 share · treated pine paling
$6,910–$9,340
93.4 m on a typical block · NSW median of fencers’ prices
The block size is Median of 6 house lots in Two Mile Flat. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,910–$9,340 | $13,820–$18,680 | $2,950–$3,980 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,840–$7,380 | $11,680–$14,760 | $2,490–$3,140 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,400–$7,010 | $2,800–$14,010 | $600–$2,990 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,870–$4,200 | $3,740–$8,410 | $800–$1,790 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,710–$16,350 | $5,420–$32,690 | $1,150–$6,960 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,740–$18,680 | $7,470–$37,360 | $1,590–$7,960 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,410–$16,350 | $16,810–$32,690 | $3,580–$6,960 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,590–$14,760 | $17,190–$29,510 | $3,660–$6,290 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,340–$12,840 | $18,680–$25,690 | $3,980–$5,470 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,680–$21,020 | $23,350–$42,030 | $4,980–$8,960 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,840–$32,690+ | $25,690–$65,380+ | $5,470–$13,930+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,020–$46,700 | $42,030–$93,400 | $8,960–$19,900 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,350–$56,040+ | $46,700–$112,080+ | $9,950–$23,880+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $37,360–$56,040 | $74,720–$112,080 | $15,920–$23,880 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 93.4 m is $6,910–$9,340.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Two Mile Flat is $6,910–$9,340.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.