Work out your fence
The block size is Median of 10 house lots in Turill. The metres are an estimate; change them to match your property.
Turill 2850 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $9,090–$12,290.
Your 50/50 share · treated pine paling
$9,090–$12,290
122.9 m on a typical block · NSW median of fencers’ prices
The block size is Median of 10 house lots in Turill. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $9,090–$12,290 | $18,190–$24,580 | $2,990–$4,040 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,680–$9,710 | $15,360–$19,420 | $2,530–$3,190 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,840–$9,220 | $3,690–$18,440 | $610–$3,030 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,460–$5,530 | $4,920–$11,060 | $810–$1,820 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,560–$21,510 | $7,130–$43,020 | $1,170–$7,070 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,920–$24,580 | $9,830–$49,160 | $1,620–$8,080 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $11,060–$21,510 | $22,120–$43,020 | $3,640–$7,070 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $11,310–$19,420 | $22,610–$38,840 | $3,720–$6,380 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $12,290–$16,900 | $24,580–$33,800 | $4,040–$5,560 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $15,360–$27,650 | $30,730–$55,310 | $5,050–$9,090 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $16,900–$43,020+ | $33,800–$86,030+ | $5,560–$14,140+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $27,650–$61,450 | $55,310–$122,900 | $9,090–$20,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $30,730–$73,740+ | $61,450–$147,480+ | $10,100–$24,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $49,160–$73,740 | $98,320–$147,480 | $16,160–$24,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 122.9 m is $9,090–$12,290.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Turill is $9,090–$12,290.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.