Work out your fence
The block size is Median of 1 house lots in Spring Flat. The metres are an estimate; change them to match your property.
Spring Flat 2850 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,620–$11,650.
Your 50/50 share · treated pine paling
$8,620–$11,650
116.5 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Spring Flat. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,620–$11,650 | $17,240–$23,300 | $1,490–$2,020 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $7,280–$9,200 | $14,560–$18,410 | $1,260–$1,600 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,750–$8,740 | $3,500–$17,480 | $300–$1,520 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,330–$5,240 | $4,660–$10,490 | $400–$910 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,380–$20,390 | $6,760–$40,780 | $590–$3,540 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,660–$23,300 | $9,320–$46,600 | $810–$4,040 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $10,490–$20,390 | $20,970–$40,780 | $1,820–$3,540 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,720–$18,410 | $21,440–$36,810 | $1,860–$3,190 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,650–$16,020 | $23,300–$32,040 | $2,020–$2,780 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $14,560–$26,210 | $29,130–$52,430 | $2,530–$4,550 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $16,020–$40,780+ | $32,040–$81,550+ | $2,780–$7,070+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $26,210–$58,250 | $52,430–$116,500 | $4,550–$10,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $29,130–$69,900+ | $58,250–$139,800+ | $5,050–$12,120+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $46,600–$69,900 | $93,200–$139,800 | $8,080–$12,120 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 116.5 m is $8,620–$11,650.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Spring Flat is $8,620–$11,650.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.