Work out your fence
The block size is the median of 274 house lots in Safety Beach. The metres are an estimate; change them to match your property.
Safety Beach 2456 · Coffs Harbour · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,990–$9,450.
Your 50/50 share · treated pine paling
$6,990–$9,450
94.5 m on a typical block · NSW median of fencers’ prices
The block size is the median of 274 house lots in Safety Beach. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,990–$9,450 | $13,990–$18,900 | $2,740–$3,700 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,910–$7,470 | $11,810–$14,930 | $2,310–$2,920 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,420–$7,090 | $2,840–$14,180 | $560–$2,780 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,890–$4,250 | $3,780–$8,510 | $740–$1,670 |
| Timber picketfrontNational price | $60–$350/m | $2,740–$16,540 | $5,480–$33,080 | $1,070–$6,480 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,780–$18,900 | $7,560–$37,800 | $1,480–$7,400 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,510–$16,540 | $17,010–$33,080 | $3,330–$6,480 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,690–$14,930 | $17,390–$29,860 | $3,400–$5,850 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,450–$12,990 | $18,900–$25,990 | $3,700–$5,090 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,810–$21,260 | $23,630–$42,530 | $4,630–$8,330 |
| Frameless glasspoolNational price | $280–$700+/m | $12,990–$33,080+ | $25,990–$66,150+ | $5,090–$12,950+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,260–$47,250 | $42,530–$94,500 | $8,330–$18,500 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $23,630–$56,700+ | $47,250–$113,400+ | $9,250–$22,200+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $37,800–$56,700 | $75,600–$113,400 | $14,800–$22,200 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Coffs Harbour fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 94.5 m is $6,990–$9,450.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Safety Beach is $6,990–$9,450.