New South Wales · local fence rules · checked 17 Nov 2026

Fence rules in Coffs Harbour.

Most fences here don’t need council approval: front fences up to 1.2 m and side or rear fences up to 1.8 m. Neighbours split a dividing fence 50/50.

Who pays for a dividing fence?

Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.

Source: Official source · checked 17 Nov 2026

Front fence height limits

Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.

Source: Official source · checked 17 Nov 2026

When you need approval

Side and rear fences up to 1.8 m (1.2 m if masonry) need no DA in most residential zones. This exemption doesn't apply on heritage items or flood control lots.

Read the council’s wording
Council page: "Check whether you need our approval A standard 1800mm (1.8 metre) timber or colour-bonded metal dividing fence meets the required standards for fencing within our Residential Zones (R1, R2, R3 and R4) and so generally will not require our approval."
Source ↗ · checked 17 Nov 2026

Source: Official source · checked 17 Nov 2026

Pool fence rules

Every pool or spa must be on the NSW Swimming Pool Register. Barriers must be at least 1.2 m high with gaps no more than 10 cm.

Read the council’s wording
Council page: "Environmental Health Officer inspections Public pools are routinely inspected by our Environmental Health Officers." "During the inspection, our Officers will test the water, review sampling records, and assess the skills and knowledge of pool operators."
Source ↗ · checked 17 Nov 2026

Source: Official source · checked 17 Nov 2026

Fences in bushfire-prone areas

On bush fire prone land, a fence built without approval must be non-combustible or hardwood. Check your lot on the NSW Planning Portal.

Source: Official source · checked 17 Nov 2026

Heritage and character areas

The no-approval fence rules don't apply on heritage items. Check with council.

Source: Official source · checked 17 Nov 2026

What a fence costs in Coffs Harbour

Coffs Harbour has the most published lot data in Coffs Harbour.

FencePrice per metreYour 50/50 share
Treated pine paling in Coffs Harbour$150–$200/m
Colorbond steel in Coffs Harbour$130–$160/m

Fence rule FAQs

Do I need council approval for a fence in Coffs Harbour?

Side and rear fences up to 1.8 m (1.2 m if masonry) need no DA in most residential zones. This exemption doesn't apply on heritage items or flood control lots.

Who pays for a dividing fence in Coffs Harbour?

Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.

How high does a pool fence need to be in Coffs Harbour?

Every pool or spa must be on the NSW Swimming Pool Register. Barriers must be at least 1.2 m high with gaps no more than 10 cm.

Can I use a timber fence in a bushfire area?

On bush fire prone land, a fence built without approval must be non-combustible or hardwood. Check your lot on the NSW Planning Portal.

How much does a fence cost in Coffs Harbour?

Treated pine paling is $150–$200/m. Your half of a typical dividing fence is $7,250–$9,800.

Contact Coffs Harbour

Email [email protected]. Visit the council website.

Get quotes from Coffs Harbour fence builders

Compare local quotes with the typical price in Coffs Harbour.

  1. Tell us the suburb, fence and length. It takes about 2 minutes.
  2. We send it to up to 3 local fencers. Free for homeowners.
  3. Compare their quotes with the estimate above. You choose who to hire.
Get up to 3 quotes →

Rule headings use published category labels. Official sources should be checked before building. General information only. These are estimates, not quotes, and not legal, planning, building or financial advice. Check your own title, council and neighbour situation before you build.