Work out your fence
The block size is Median of 1129 house lots in Woolgoolga. The metres are an estimate; change them to match your property.
Woolgoolga 2456 · Coffs Harbour · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,080–$9,570.
Your 50/50 share · treated pine paling
$7,080–$9,570
95.7 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1129 house lots in Woolgoolga. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,080–$9,570 | $14,160–$19,140 | $2,800–$3,780 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,980–$7,560 | $11,960–$15,120 | $2,360–$2,990 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,440–$7,180 | $2,870–$14,360 | $570–$2,840 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,910–$4,310 | $3,830–$8,610 | $760–$1,700 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,780–$16,750 | $5,550–$33,500 | $1,100–$6,610 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,830–$19,140 | $7,660–$38,280 | $1,510–$7,560 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,610–$16,750 | $17,230–$33,500 | $3,400–$6,610 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,800–$15,120 | $17,610–$30,240 | $3,480–$5,970 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,570–$13,160 | $19,140–$26,320 | $3,780–$5,200 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,960–$21,530 | $23,930–$43,070 | $4,730–$8,510 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,160–$33,500+ | $26,320–$66,990+ | $5,200–$13,230+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,530–$47,850 | $43,070–$95,700 | $8,510–$18,900 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,930–$57,420+ | $47,850–$114,840+ | $9,450–$22,680+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $38,280–$57,420 | $76,560–$114,840 | $15,120–$22,680 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Coffs Harbour fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 95.7 m is $7,080–$9,570.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 27% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Woolgoolga is $7,080–$9,570.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.