Work out your fence
The block size is the median of 543 house lots in Revesby Heights. The metres are an estimate; change them to match your property.
Revesby Heights 2212 · Canterbury-Bankstown · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $7,430–$9,680.
Your 50/50 share · treated pine paling
$7,430–$9,680
90 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is the median of 543 house lots in Revesby Heights. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $7,430–$9,680 | $14,850–$19,350 | $2,260–$2,950 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $5,810–$7,430 | $11,610–$14,850 | $1,770–$2,260 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,350–$6,750 | $2,700–$13,500 | $410–$2,060 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,800–$4,050 | $3,600–$8,100 | $550–$1,230 |
| Timber picketfrontNational price | $60–$350/m | $2,610–$15,750 | $5,220–$31,500 | $790–$4,800 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,600–$18,000 | $7,200–$36,000 | $1,100–$5,480 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,100–$15,750 | $16,200–$31,500 | $2,470–$4,800 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,280–$14,220 | $16,560–$28,440 | $2,520–$4,330 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,000–$12,380 | $18,000–$24,750 | $2,740–$3,770 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,250–$20,250 | $22,500–$40,500 | $3,430–$6,170 |
| Frameless glasspoolNational price | $280–$700+/m | $12,380–$31,500+ | $24,750–$63,000+ | $3,770–$9,590+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $20,250–$45,000 | $40,500–$90,000 | $6,170–$13,700 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $22,500–$54,000+ | $45,000–$108,000+ | $6,850–$16,440+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $36,000–$54,000 | $72,000–$108,000 | $10,960–$16,440 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Canterbury-Bankstown fence rules · Read the full rules
We’ve checked some of Canterbury-Bankstown’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 90 m is $7,430–$9,680.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Revesby Heights is $7,430–$9,680.