Work out your fence
The block size is Median of 3 house lots in Olinda. The metres are an estimate; change them to match your property.
Olinda 2849 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $3,700–$5,000.
Your 50/50 share · treated pine paling
$3,700–$5,000
50 m on a typical block · NSW median of fencers’ prices
The block size is Median of 3 house lots in Olinda. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $3,700–$5,000 | $7,400–$10,000 | $3,240–$4,380 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $3,130–$3,950 | $6,250–$7,900 | $2,740–$3,460 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $750–$3,750 | $1,500–$7,500 | $660–$3,290 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,000–$2,250 | $2,000–$4,500 | $880–$1,970 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,450–$8,750 | $2,900–$17,500 | $1,270–$7,660 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $2,000–$10,000 | $4,000–$20,000 | $1,750–$8,760 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $4,500–$8,750 | $9,000–$17,500 | $3,940–$7,660 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $4,600–$7,900 | $9,200–$15,800 | $4,030–$6,920 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $5,000–$6,880 | $10,000–$13,750 | $4,380–$6,020 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $6,250–$11,250 | $12,500–$22,500 | $5,480–$9,860 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $6,880–$17,500+ | $13,750–$35,000+ | $6,020–$15,330+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $11,250–$25,000 | $22,500–$50,000 | $9,860–$21,900 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $12,500–$30,000+ | $25,000–$60,000+ | $10,950–$26,280+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $20,000–$30,000 | $40,000–$60,000 | $17,520–$26,280 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 50 m is $3,700–$5,000.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Olinda is $3,700–$5,000.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.