Work out your fence
The block size is Median of 647 house lots in Lansdowne. The metres are an estimate; change them to match your property.
Lansdowne 2163 · Canterbury-Bankstown · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $8,300–$10,810.
Your 50/50 share · treated pine paling
$8,300–$10,810
100.6 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is Median of 647 house lots in Lansdowne. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $8,300–$10,810 | $16,600–$21,630 | $2,260–$2,950 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,490–$8,300 | $12,980–$16,600 | $1,770–$2,260 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,510–$7,550 | $3,020–$15,090 | $410–$2,060 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,010–$4,530 | $4,020–$9,050 | $550–$1,230 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,920–$17,610 | $5,830–$35,210 | $790–$4,800 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,020–$20,120 | $8,050–$40,240 | $1,100–$5,480 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,050–$17,610 | $18,110–$35,210 | $2,470–$4,800 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,260–$15,890 | $18,510–$31,790 | $2,520–$4,330 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,060–$13,830 | $20,120–$27,670 | $2,740–$3,770 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,580–$22,640 | $25,150–$45,270 | $3,430–$6,170 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,830–$35,210+ | $27,670–$70,420+ | $3,770–$9,590+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,640–$50,300 | $45,270–$100,600 | $6,170–$13,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,150–$60,360+ | $50,300–$120,720+ | $6,850–$16,440+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $40,240–$60,360 | $80,480–$120,720 | $10,960–$16,440 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Canterbury-Bankstown fence rules · Read the full rules
We’ve checked some of Canterbury-Bankstown’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 100.6 m is $8,300–$10,810.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 27% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Lansdowne is $8,300–$10,810.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| Glovers Fencing | Colorbond | 1.8 m | $120–$140 | gloversfencing.com.au · checked 16 Nov 2026 |
Price research is available in how we price.