Work out your fence
The block size is Median of 245 house lots in Kew. The metres are an estimate; change them to match your property.
Kew 2439 · Port Macquarie-Hastings · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,640–$8,970.
Your 50/50 share · treated pine paling
$6,640–$8,970
89.7 m on a typical block · NSW median of fencers’ prices
The block size is Median of 245 house lots in Kew. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,640–$8,970 | $13,280–$17,940 | $2,920–$3,940 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,610–$7,090 | $11,210–$14,170 | $2,460–$3,110 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,350–$6,730 | $2,690–$13,460 | $590–$2,960 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,790–$4,040 | $3,590–$8,070 | $790–$1,770 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,600–$15,700 | $5,200–$31,400 | $1,140–$6,900 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,590–$17,940 | $7,180–$35,880 | $1,580–$7,880 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,070–$15,700 | $16,150–$31,400 | $3,550–$6,900 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,250–$14,170 | $16,500–$28,350 | $3,620–$6,230 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,970–$12,330 | $17,940–$24,670 | $3,940–$5,420 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,210–$20,180 | $22,430–$40,370 | $4,930–$8,870 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,330–$31,400+ | $24,670–$62,790+ | $5,420–$13,790+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $20,180–$44,850 | $40,370–$89,700 | $8,870–$19,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $22,430–$53,820+ | $44,850–$107,640+ | $9,850–$23,640+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $35,880–$53,820 | $71,760–$107,640 | $15,760–$23,640 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Port Macquarie-Hastings fence rules · Read the full rules
We’ve checked some of Port Macquarie-Hastings’ pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 89.7 m is $6,640–$8,970.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Kew is $6,640–$8,970.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.