Work out your fence
The block size is the median of 837 house lots in Bonny Hills. The metres are an estimate; change them to match your property.
Bonny Hills 2445 · Port Macquarie-Hastings · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,410–$8,660.
Your 50/50 share · treated pine paling
$6,410–$8,660
86.6 m on a typical block · NSW median of fencers’ prices
The block size is the median of 837 house lots in Bonny Hills. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,410–$8,660 | $12,820–$17,320 | $2,710–$3,660 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,410–$6,840 | $10,830–$13,680 | $2,290–$2,890 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,300–$6,500 | $2,600–$12,990 | $550–$2,750 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,730–$3,900 | $3,460–$7,790 | $730–$1,650 |
| Timber picketfrontNational price | $60–$350/m | $2,510–$15,150 | $5,020–$30,310 | $1,060–$6,410 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,460–$17,320 | $6,930–$34,640 | $1,460–$7,320 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,790–$15,150 | $15,590–$30,310 | $3,290–$6,410 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,970–$13,680 | $15,930–$27,370 | $3,370–$5,780 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,660–$11,910 | $17,320–$23,820 | $3,660–$5,030 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,830–$19,490 | $21,650–$38,970 | $4,580–$8,240 |
| Frameless glasspoolNational price | $280–$700+/m | $11,910–$30,310+ | $23,820–$60,620+ | $5,030–$12,810+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $19,490–$43,300 | $38,970–$86,600 | $8,240–$18,300 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $21,650–$51,960+ | $43,300–$103,920+ | $9,150–$21,960+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $34,640–$51,960 | $69,280–$103,920 | $14,640–$21,960 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Port Macquarie-Hastings fence rules · Read the full rules
We’ve checked some of Port Macquarie-Hastings’ pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 86.6 m is $6,410–$8,660.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bonny Hills is $6,410–$8,660.