Work out your fence
The block size is the median of 10,684 house lots in Port Macquarie. The metres are an estimate; change them to match your property.
Port Macquarie 2444 · Port Macquarie-Hastings · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,430–$8,690.
Your 50/50 share · treated pine paling
$6,430–$8,690
86.9 m on a typical block · NSW median of fencers’ prices
The block size is the median of 10,684 house lots in Port Macquarie. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,430–$8,690 | $12,860–$17,380 | $2,750–$3,720 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,430–$6,870 | $10,860–$13,730 | $2,330–$2,940 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,300–$6,520 | $2,610–$13,040 | $560–$2,790 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,740–$3,910 | $3,480–$7,820 | $740–$1,670 |
| Timber picketfrontNational price | $60–$350/m | $2,520–$15,210 | $5,040–$30,420 | $1,080–$6,510 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,480–$17,380 | $6,950–$34,760 | $1,490–$7,440 |
| Tubular metalfront, poolNational price | $180–$350/m | $7,820–$15,210 | $15,640–$30,420 | $3,350–$6,510 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $7,990–$13,730 | $15,990–$27,460 | $3,420–$5,880 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $8,690–$11,950 | $17,380–$23,900 | $3,720–$5,120 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $10,860–$19,550 | $21,730–$39,110 | $4,650–$8,370 |
| Frameless glasspoolNational price | $280–$700+/m | $11,950–$30,420+ | $23,900–$60,830+ | $5,120–$13,020+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $19,550–$43,450 | $39,110–$86,900 | $8,370–$18,600 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $21,730–$52,140+ | $43,450–$104,280+ | $9,300–$22,320+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $34,760–$52,140 | $69,520–$104,280 | $14,880–$22,320 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Port Macquarie-Hastings fence rules · Read the full rules
We’ve checked some of Port Macquarie-Hastings’ pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 86.9 m is $6,430–$8,690.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Port Macquarie is $6,430–$8,690.