Work out your fence
The block size is Median of 177 house lots in Kendall. The metres are an estimate; change them to match your property.
Kendall 2439 · Port Macquarie-Hastings · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,600–$10,270.
Your 50/50 share · treated pine paling
$7,600–$10,270
102.7 m on a typical block · NSW median of fencers’ prices
The block size is Median of 177 house lots in Kendall. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,600–$10,270 | $15,200–$20,540 | $2,810–$3,800 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,420–$8,110 | $12,840–$16,230 | $2,380–$3,000 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,540–$7,700 | $3,080–$15,410 | $570–$2,850 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,050–$4,620 | $4,110–$9,240 | $760–$1,710 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,980–$17,970 | $5,960–$35,950 | $1,100–$6,650 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,110–$20,540 | $8,220–$41,080 | $1,520–$7,600 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,240–$17,970 | $18,490–$35,950 | $3,420–$6,650 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,450–$16,230 | $18,900–$32,450 | $3,500–$6,000 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,270–$14,120 | $20,540–$28,240 | $3,800–$5,230 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,840–$23,110 | $25,680–$46,220 | $4,750–$8,550 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,120–$35,950+ | $28,240–$71,890+ | $5,230–$13,300+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $23,110–$51,350 | $46,220–$102,700 | $8,550–$19,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,680–$61,620+ | $51,350–$123,240+ | $9,500–$22,800+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $41,080–$61,620 | $82,160–$123,240 | $15,200–$22,800 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Port Macquarie-Hastings fence rules · Read the full rules
We’ve checked some of Port Macquarie-Hastings’ pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 102.7 m is $7,600–$10,270.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Kendall is $7,600–$10,270.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.