Work out your fence
The block size is Median of 1 house lots in Jinden. The metres are an estimate; change them to match your property.
Jinden 2622 · Queanbeyan-Palerang Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $11,000–$14,860.
Your 50/50 share · treated pine paling
$11,000–$14,860
148.6 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Jinden. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $11,000–$14,860 | $21,990–$29,720 | $2,250–$3,040 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $9,290–$11,740 | $18,580–$23,480 | $1,900–$2,400 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $2,230–$11,150 | $4,460–$22,290 | $460–$2,280 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,970–$6,690 | $5,940–$13,370 | $610–$1,370 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $4,310–$26,010 | $8,620–$52,010 | $880–$5,320 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $5,940–$29,720 | $11,890–$59,440 | $1,220–$6,080 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $13,370–$26,010 | $26,750–$52,010 | $2,740–$5,320 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $13,670–$23,480 | $27,340–$46,960 | $2,800–$4,800 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $14,860–$20,430 | $29,720–$40,870 | $3,040–$4,180 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $18,580–$33,440 | $37,150–$66,870 | $3,800–$6,840 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $20,430–$52,010+ | $40,870–$104,020+ | $4,180–$10,640+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $33,440–$74,300 | $66,870–$148,600 | $6,840–$15,200 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $37,150–$89,160+ | $74,300–$178,320+ | $7,600–$18,240+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $59,440–$89,160 | $118,880–$178,320 | $12,160–$18,240 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Queanbeyan-Palerang Regional fence rules · Read the full rules
We’ve checked some of Queanbeyan-Palerang Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 148.6 m is $11,000–$14,860.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Jinden is $11,000–$14,860.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.