Work out your fence
The block size is Median of 1 house lots in Cudgegong. The metres are an estimate; change them to match your property.
Cudgegong 2850 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $3,350–$4,530.
Your 50/50 share · treated pine paling
$3,350–$4,530
45.3 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Cudgegong. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $3,350–$4,530 | $6,700–$9,060 | $3,300–$4,460 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $2,830–$3,580 | $5,660–$7,160 | $2,790–$3,520 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $680–$3,400 | $1,360–$6,800 | $670–$3,350 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $910–$2,040 | $1,810–$4,080 | $890–$2,010 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,310–$7,930 | $2,630–$15,850 | $1,290–$7,810 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $1,810–$9,060 | $3,620–$18,120 | $1,780–$8,920 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $4,080–$7,930 | $8,150–$15,850 | $4,010–$7,810 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $4,170–$7,160 | $8,340–$14,310 | $4,100–$7,050 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $4,530–$6,230 | $9,060–$12,460 | $4,460–$6,130 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $5,660–$10,190 | $11,330–$20,390 | $5,580–$10,040 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $6,230–$15,850+ | $12,460–$31,710+ | $6,130–$15,610+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $10,190–$22,650 | $20,390–$45,300 | $10,040–$22,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $11,330–$27,180+ | $22,650–$54,360+ | $11,150–$26,760+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $18,120–$27,180 | $36,240–$54,360 | $17,840–$26,760 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 45.3 m is $3,350–$4,530.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Cudgegong is $3,350–$4,530.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.