Work out your fence
The block size is Median of 117 house lots in Crosslands. The metres are an estimate; change them to match your property.
Crosslands 2446 · Port Macquarie-Hastings · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,930–$9,370.
Your 50/50 share · treated pine paling
$6,930–$9,370
93.7 m on a typical block · NSW median of fencers’ prices
The block size is Median of 117 house lots in Crosslands. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,930–$9,370 | $13,870–$18,740 | $2,750–$3,720 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,860–$7,400 | $11,710–$14,800 | $2,330–$2,940 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,410–$7,030 | $2,810–$14,060 | $560–$2,790 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,870–$4,220 | $3,750–$8,430 | $740–$1,670 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,720–$16,400 | $5,430–$32,800 | $1,080–$6,510 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,750–$18,740 | $7,500–$37,480 | $1,490–$7,440 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,430–$16,400 | $16,870–$32,800 | $3,350–$6,510 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,620–$14,800 | $17,240–$29,610 | $3,420–$5,880 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,370–$12,880 | $18,740–$25,770 | $3,720–$5,120 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,710–$21,080 | $23,430–$42,170 | $4,650–$8,370 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,880–$32,800+ | $25,770–$65,590+ | $5,120–$13,020+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $21,080–$46,850 | $42,170–$93,700 | $8,370–$18,600 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,430–$56,220+ | $46,850–$112,440+ | $9,300–$22,320+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $37,480–$56,220 | $74,960–$112,440 | $14,880–$22,320 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Port Macquarie-Hastings fence rules · Read the full rules
We’ve checked some of Port Macquarie-Hastings’ pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 93.7 m is $6,930–$9,370.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Crosslands is $6,930–$9,370.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.