Work out your fence
The block size is Median of 104 house lots in Coramba. The metres are an estimate; change them to match your property.
Coramba 2450 · Coffs Harbour · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,900–$9,320.
Your 50/50 share · treated pine paling
$6,900–$9,320
93.2 m on a typical block · NSW median of fencers’ prices
The block size is Median of 104 house lots in Coramba. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,900–$9,320 | $13,790–$18,640 | $2,220–$3,000 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,830–$7,360 | $11,650–$14,730 | $1,880–$2,370 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,400–$6,990 | $2,800–$13,980 | $450–$2,250 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,860–$4,190 | $3,730–$8,390 | $600–$1,350 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,700–$16,310 | $5,410–$32,620 | $870–$5,250 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,730–$18,640 | $7,460–$37,280 | $1,200–$6,000 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $8,390–$16,310 | $16,780–$32,620 | $2,700–$5,250 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,570–$14,730 | $17,150–$29,450 | $2,760–$4,740 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $9,320–$12,820 | $18,640–$25,630 | $3,000–$4,130 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,650–$20,970 | $23,300–$41,940 | $3,750–$6,750 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,820–$32,620+ | $25,630–$65,240+ | $4,130–$10,500+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $20,970–$46,600 | $41,940–$93,200 | $6,750–$15,000 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $23,300–$55,920+ | $46,600–$111,840+ | $7,500–$18,000+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $37,280–$55,920 | $74,560–$111,840 | $12,000–$18,000 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Coffs Harbour fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 93.2 m is $6,900–$9,320.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 29% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Coramba is $6,900–$9,320.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.