Work out your fence
The block size is Median of 3 house lots in Cooperabung. The metres are an estimate; change them to match your property.
Cooperabung 2441 · Port Macquarie-Hastings · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $4,510–$6,100.
Your 50/50 share · treated pine paling
$4,510–$6,100
61 m on a typical block · NSW median of fencers’ prices
The block size is Median of 3 house lots in Cooperabung. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $4,510–$6,100 | $9,030–$12,200 | $3,420–$4,620 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $3,810–$4,820 | $7,630–$9,640 | $2,890–$3,650 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $920–$4,580 | $1,830–$9,150 | $690–$3,470 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,220–$2,750 | $2,440–$5,490 | $920–$2,080 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,770–$10,680 | $3,540–$21,350 | $1,340–$8,090 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $2,440–$12,200 | $4,880–$24,400 | $1,850–$9,240 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $5,490–$10,680 | $10,980–$21,350 | $4,160–$8,090 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $5,610–$9,640 | $11,220–$19,280 | $4,250–$7,300 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $6,100–$8,390 | $12,200–$16,780 | $4,620–$6,350 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $7,630–$13,730 | $15,250–$27,450 | $5,780–$10,400 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $8,390–$21,350+ | $16,780–$42,700+ | $6,350–$16,170+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $13,730–$30,500 | $27,450–$61,000 | $10,400–$23,100 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $15,250–$36,600+ | $30,500–$73,200+ | $11,550–$27,720+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $24,400–$36,600 | $48,800–$73,200 | $18,480–$27,720 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Port Macquarie-Hastings fence rules · Read the full rules
We’ve checked some of Port Macquarie-Hastings’ pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 61 m is $4,510–$6,100.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Cooperabung is $4,510–$6,100.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.