Work out your fence
The block size is Median of 1 house lots in Collingwood. The metres are an estimate; change them to match your property.
Collingwood 2850 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,040–$10,870.
Your 50/50 share · treated pine paling
$8,040–$10,870
108.7 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Collingwood. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,040–$10,870 | $16,090–$21,740 | $3,210–$4,340 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,790–$8,590 | $13,590–$17,170 | $2,710–$3,430 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,630–$8,150 | $3,260–$16,310 | $650–$3,260 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,170–$4,890 | $4,350–$9,780 | $870–$1,950 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,150–$19,020 | $6,300–$38,050 | $1,260–$7,600 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,350–$21,740 | $8,700–$43,480 | $1,740–$8,680 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,780–$19,020 | $19,570–$38,050 | $3,910–$7,600 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,000–$17,170 | $20,000–$34,350 | $3,990–$6,860 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,870–$14,950 | $21,740–$29,890 | $4,340–$5,970 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,590–$24,460 | $27,180–$48,920 | $5,430–$9,770 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $14,950–$38,050+ | $29,890–$76,090+ | $5,970–$15,190+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $24,460–$54,350 | $48,920–$108,700 | $9,770–$21,700 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $27,180–$65,220+ | $54,350–$130,440+ | $10,850–$26,040+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $43,480–$65,220 | $86,960–$130,440 | $17,360–$26,040 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 108.7 m is $8,040–$10,870.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Collingwood is $8,040–$10,870.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.