Work out your fence
The block size is the median of 1,252 house lots in Canterbury. The metres are an estimate; change them to match your property.
Canterbury 2193 · Canterbury-Bankstown · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $7,540–$9,830.
Your 50/50 share · treated pine paling
$7,540–$9,830
91.4 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is the median of 1,252 house lots in Canterbury. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $7,540–$9,830 | $15,080–$19,650 | $2,010–$2,620 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $5,900–$7,540 | $11,790–$15,080 | $1,570–$2,010 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,370–$6,860 | $2,740–$13,710 | $370–$1,830 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,830–$4,110 | $3,660–$8,230 | $490–$1,100 |
| Timber picketfrontNational price | $60–$350/m | $2,650–$16,000 | $5,300–$31,990 | $710–$4,270 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,660–$18,280 | $7,310–$36,560 | $980–$4,880 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,230–$16,000 | $16,450–$31,990 | $2,200–$4,270 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,410–$14,440 | $16,820–$28,880 | $2,240–$3,860 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,140–$12,570 | $18,280–$25,140 | $2,440–$3,360 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,430–$20,570 | $22,850–$41,130 | $3,050–$5,490 |
| Frameless glasspoolNational price | $280–$700+/m | $12,570–$31,990+ | $25,140–$63,980+ | $3,360–$8,540+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $20,570–$45,700 | $41,130–$91,400 | $5,490–$12,200 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $22,850–$54,840+ | $45,700–$109,680+ | $6,100–$14,640+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $36,560–$54,840 | $73,120–$109,680 | $9,760–$14,640 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Canterbury-Bankstown fence rules · Read the full rules
We’ve checked some of Canterbury-Bankstown’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 91.4 m is $7,540–$9,830.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Canterbury is $7,540–$9,830.