Work out your fence
The block size is the median of 2,837 house lots in Campsie. The metres are an estimate; change them to match your property.
Campsie 2194 · Canterbury-Bankstown · New South Wales
A standard fence costs $170–$220/m installed. Your half of a typical dividing fence is about $7,900–$10,290.
Your 50/50 share · treated pine paling
$7,900–$10,290
95.7 m on a typical block · Wider-area fencers’ prices (3 fencers)
The block size is the median of 2,837 house lots in Campsie. The metres are an estimate; change them to match your property.
| Fence | Per metre | Your share | Whole fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontWider-area fencers’ prices (3 fencers) | $170–$220/m | $7,900–$10,290 | $15,790–$20,580 | $2,010–$2,620 |
| Colorbond steeldividing, frontWider-area fencers’ prices (4 fencers) | $130–$170/m | $6,170–$7,900 | $12,350–$15,790 | $1,570–$2,010 |
| Chain wire / chain linkdividingNational price | $30–$150/m | $1,440–$7,180 | $2,870–$14,360 | $370–$1,830 |
| PVC / vinylfront, dividingNational price | $40–$90/m | $1,910–$4,310 | $3,830–$8,610 | $490–$1,100 |
| Timber picketfrontNational price | $60–$350/m | $2,780–$16,750 | $5,550–$33,500 | $710–$4,270 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational price | $80–$400/m | $3,830–$19,140 | $7,660–$38,280 | $980–$4,880 |
| Tubular metalfront, poolNational price | $180–$350/m | $8,610–$16,750 | $17,230–$33,500 | $2,200–$4,270 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,800–$15,120 | $17,610–$30,240 | $2,240–$3,860 |
| Semi-frameless glasspool, frontNational price | $200–$280/m | $9,570–$13,160 | $19,140–$26,320 | $2,440–$3,360 |
| Timber slat / horizontal slat screenscreen, front, dividingNational price | $250–$450/m | $11,960–$21,530 | $23,930–$43,070 | $3,050–$5,490 |
| Frameless glasspoolNational price | $280–$700+/m | $13,160–$33,500+ | $26,320–$66,990+ | $3,360–$8,540+ |
| Wrought iron / cast ironfrontNational price | $450–$1,000/m | $21,530–$47,850 | $43,070–$95,700 | $5,490–$12,200 |
| Brick, stone or rendered masonryfront, dividingNational price | $500–$1,200+/m | $23,930–$57,420+ | $47,850–$114,840+ | $6,100–$14,640+ |
| Sandstone and timberfrontNational price | $800–$1,200/m | $38,280–$57,420 | $76,560–$114,840 | $9,760–$14,640 |
Rows marked National price use the national range because we have fewer than 2 local fencer prices for that type. See published prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Canterbury-Bankstown fence rules · Read the full rules
We’ve checked some of Canterbury-Bankstown’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $170–$220/m. Your typical 50/50 share for 95.7 m is $7,900–$10,290.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Campsie is $7,900–$10,290.