Work out your fence
The block size is Median of 2 house lots in Bywong. The metres are an estimate; change them to match your property.
Bywong 2621 · Queanbeyan-Palerang Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $5,410–$7,310.
Your 50/50 share · treated pine paling
$5,410–$7,310
73.1 m on a typical block · NSW median of fencers’ prices
The block size is Median of 2 house lots in Bywong. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $5,410–$7,310 | $10,820–$14,620 | $1,700–$2,300 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $4,570–$5,770 | $9,140–$11,550 | $1,440–$1,820 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,100–$5,480 | $2,190–$10,970 | $350–$1,730 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,460–$3,290 | $2,920–$6,580 | $460–$1,040 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,120–$12,790 | $4,240–$25,580 | $670–$4,030 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $2,920–$14,620 | $5,850–$29,240 | $920–$4,600 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $6,580–$12,790 | $13,160–$25,580 | $2,070–$4,030 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $6,730–$11,550 | $13,450–$23,100 | $2,120–$3,630 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $7,310–$10,050 | $14,620–$20,100 | $2,300–$3,160 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $9,140–$16,450 | $18,280–$32,900 | $2,880–$5,180 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $10,050–$25,580+ | $20,100–$51,170+ | $3,160–$8,050+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $16,450–$36,550 | $32,900–$73,100 | $5,180–$11,500 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $18,280–$43,860+ | $36,550–$87,720+ | $5,750–$13,800+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $29,240–$43,860 | $58,480–$87,720 | $9,200–$13,800 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Queanbeyan-Palerang Regional fence rules · Read the full rules
We’ve checked some of Queanbeyan-Palerang Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 73.1 m is $5,410–$7,310.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Bywong is $5,410–$7,310.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.