Work out your fence
The block size is Median of 1 house lots in Burrundulla. The metres are an estimate; change them to match your property.
Burrundulla 2850 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $4,010–$5,420.
Your 50/50 share · treated pine paling
$4,010–$5,420
54.2 m on a typical block · NSW median of fencers’ prices
The block size is Median of 1 house lots in Burrundulla. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $4,010–$5,420 | $8,020–$10,840 | $2,870–$3,880 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $3,390–$4,280 | $6,780–$8,560 | $2,430–$3,070 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $810–$4,070 | $1,630–$8,130 | $580–$2,910 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,080–$2,440 | $2,170–$4,880 | $780–$1,750 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $1,570–$9,490 | $3,140–$18,970 | $1,130–$6,790 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $2,170–$10,840 | $4,340–$21,680 | $1,550–$7,760 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $4,880–$9,490 | $9,760–$18,970 | $3,490–$6,790 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $4,990–$8,560 | $9,970–$17,130 | $3,570–$6,130 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $5,420–$7,450 | $10,840–$14,910 | $3,880–$5,340 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $6,780–$12,200 | $13,550–$24,390 | $4,850–$8,730 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $7,450–$18,970+ | $14,910–$37,940+ | $5,340–$13,580+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $12,200–$27,100 | $24,390–$54,200 | $8,730–$19,400 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $13,550–$32,520+ | $27,100–$65,040+ | $9,700–$23,280+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $21,680–$32,520 | $43,360–$65,040 | $15,520–$23,280 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 54.2 m is $4,010–$5,420.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Burrundulla is $4,010–$5,420.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.