Work out your fence
The block size is Median of 2 house lots in Buckaroo. The metres are an estimate; change them to match your property.
Buckaroo 2850 · Mid-Western Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $6,530–$8,820.
Your 50/50 share · treated pine paling
$6,530–$8,820
88.2 m on a typical block · NSW median of fencers’ prices
The block size is Median of 2 house lots in Buckaroo. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $6,530–$8,820 | $13,050–$17,640 | $2,560–$3,460 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $5,510–$6,970 | $11,030–$13,940 | $2,160–$2,730 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,320–$6,620 | $2,650–$13,230 | $520–$2,600 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $1,760–$3,970 | $3,530–$7,940 | $690–$1,560 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,560–$15,440 | $5,120–$30,870 | $1,000–$6,060 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $3,530–$17,640 | $7,060–$35,280 | $1,380–$6,920 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $7,940–$15,440 | $15,880–$30,870 | $3,110–$6,060 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $8,110–$13,940 | $16,230–$27,870 | $3,180–$5,470 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $8,820–$12,130 | $17,640–$24,260 | $3,460–$4,760 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $11,030–$19,850 | $22,050–$39,690 | $4,330–$7,790 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $12,130–$30,870+ | $24,260–$61,740+ | $4,760–$12,110+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $19,850–$44,100 | $39,690–$88,200 | $7,790–$17,300 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $22,050–$52,920+ | $44,100–$105,840+ | $8,650–$20,760+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $35,280–$52,920 | $70,560–$105,840 | $13,840–$20,760 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Mid-Western Regional fence rules · Read the full rules
We’ve checked some of Mid-Western Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 88.2 m is $6,530–$8,820.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Buckaroo is $6,530–$8,820.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.