Work out your fence
The block size is Median of 20 house lots in Brooklana. The metres are an estimate; change them to match your property.
Brooklana 2450 · Coffs Harbour · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $8,150–$11,020.
Your 50/50 share · treated pine paling
$8,150–$11,020
110.2 m on a typical block · NSW median of fencers’ prices
The block size is Median of 20 house lots in Brooklana. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $8,150–$11,020 | $16,310–$22,040 | $3,090–$4,180 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,890–$8,710 | $13,780–$17,410 | $2,610–$3,300 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,650–$8,270 | $3,310–$16,530 | $630–$3,140 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,200–$4,960 | $4,410–$9,920 | $840–$1,880 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $3,200–$19,290 | $6,390–$38,570 | $1,210–$7,310 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,410–$22,040 | $8,820–$44,080 | $1,670–$8,360 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,920–$19,290 | $19,840–$38,570 | $3,760–$7,310 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $10,140–$17,410 | $20,280–$34,820 | $3,850–$6,600 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $11,020–$15,150 | $22,040–$30,310 | $4,180–$5,750 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $13,780–$24,800 | $27,550–$49,590 | $5,230–$9,410 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $15,150–$38,570+ | $30,310–$77,140+ | $5,750–$14,630+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $24,800–$55,100 | $49,590–$110,200 | $9,410–$20,900 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $27,550–$66,120+ | $55,100–$132,240+ | $10,450–$25,080+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $44,080–$66,120 | $88,160–$132,240 | $16,720–$25,080 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Coffs Harbour fence rules · Read the full rules
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 110.2 m is $8,150–$11,020.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 55% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Brooklana is $8,150–$11,020.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.