Work out your fence
The block size is Median of 386 house lots in Braidwood. The metres are an estimate; change them to match your property.
Braidwood 2622 · Queanbeyan-Palerang Regional · New South Wales
A standard fence costs $150–$200/m installed. Your half of a typical dividing fence is about $7,460–$10,080.
Your 50/50 share · treated pine paling
$7,460–$10,080
100.8 m on a typical block · NSW median of fencers’ prices
The block size is Median of 386 house lots in Braidwood. The metres are an estimate; change them to match your property.
| Fence | Price per metre | Your 50/50 share | Whole dividing fence | Front fence |
|---|---|---|---|---|
| Treated pine palingMost commondividing, frontNSW median of fencers’ prices | $150–$200/m | $7,460–$10,080 | $14,920–$20,160 | $2,890–$3,900 |
| Colorbond steeldividing, frontNSW median of fencers’ prices | $130–$160/m | $6,300–$7,960 | $12,600–$15,930 | $2,440–$3,080 |
| Chain wire / chain linkdividingNational range (few local prices yet) | $30–$150/m | $1,510–$7,560 | $3,020–$15,120 | $590–$2,930 |
| PVC / vinylfront, dividingNational range (few local prices yet) | $40–$90/m | $2,020–$4,540 | $4,030–$9,070 | $780–$1,760 |
| Timber picketfrontNational range (few local prices yet) | $60–$350/m | $2,920–$17,640 | $5,850–$35,280 | $1,130–$6,830 |
| Aluminium slat / pool fencingpool, front, screen, dividingNational range (few local prices yet) | $80–$400/m | $4,030–$20,160 | $8,060–$40,320 | $1,560–$7,800 |
| Tubular metalfront, poolNational range (few local prices yet) | $180–$350/m | $9,070–$17,640 | $18,140–$35,280 | $3,510–$6,830 |
| Hardwood paling / lapped and cappeddividing, frontNSW median of fencers’ prices | $180–$320/m | $9,270–$15,930 | $18,550–$31,850 | $3,590–$6,160 |
| Semi-frameless glasspool, frontNational range (few local prices yet) | $200–$280/m | $10,080–$13,860 | $20,160–$27,720 | $3,900–$5,360 |
| Timber slat / horizontal slat screenscreen, front, dividingNational range (few local prices yet) | $250–$450/m | $12,600–$22,680 | $25,200–$45,360 | $4,880–$8,780 |
| Frameless glasspoolNational range (few local prices yet) | $280–$700+/m | $13,860–$35,280+ | $27,720–$70,560+ | $5,360–$13,650+ |
| Wrought iron / cast ironfrontNational range (few local prices yet) | $450–$1,000/m | $22,680–$50,400 | $45,360–$100,800 | $8,780–$19,500 |
| Brick, stone or rendered masonryfront, dividingNational range (few local prices yet) | $500–$1,200+/m | $25,200–$60,480+ | $50,400–$120,960+ | $9,750–$23,400+ |
| Sandstone and timberfrontNational range (few local prices yet) | $800–$1,200/m | $40,320–$60,480 | $80,640–$120,960 | $15,600–$23,400 |
Grey price-source rows use a state or national fallback. A national range is indicative and may have few local prices.
Old fence removal and disposal usually adds $20–$40 per metre, typically about $30. That’s around 20% of a typical Colorbond or paling price (usually 15–25%).
Rocky or hard ground usually adds $15–$45 per metre, typically about $25. That’s around 15% of a typical Colorbond or paling rate (usually 10–25%). Very hard ground sits at the high end.
A plinth or sleeper under the fence, for a small level change or to close the gap at the bottom, usually adds $10–$30 per metre, typically about $20.
Slopes, retaining, trees and tight access are confirmed by your fencer. Extras are calculated separately and do not compound.
Queanbeyan-Palerang Regional fence rules · Read the full rules
We’ve checked some of Queanbeyan-Palerang Regional’s pages, not all. Where there’s no council rule on file we show the New South Wales rule. Check with council before you build.
A treated pine paling fence is $150–$200/m. Your typical 50/50 share for 100.8 m is $7,460–$10,080.
Neighbours generally split a sufficient dividing fence 50/50. If you want a higher standard, you pay the extra.
Up to 1.2 m in most residential zones without approval. A higher front fence needs a complying development certificate or a DA.
Yes. Removal is an optional per-metre extra. The fencer confirms the final cost and any licensed asbestos work.
The property owner usually pays the full cost. About 30% of local lots have a laneway.
Block-size source: NSW Cadastre (Lot layer) and NSW Administrative Boundaries (Suburb, LGA) © Spatial Services, NSW Department of Customer Service (CC BY 4.0). Last updated 17 Nov 2026. Cadastre: Vicmap © Department of Transport and Planning (Vic), NSW Spatial Services, Queensland Government (QSpatial), theLIST © State of Tasmania and ACTmapi, used under CC BY 4.0. SA, WA and NT block sizes are typical-block assumptions.
Your typical 50/50 share in Braidwood is $7,460–$10,080.
| Fencer | Fence | Height | Published rate | Source |
|---|---|---|---|---|
| No local source rows are published yet. | ||||
Price research is available in how we price.